60s Mod Couch Reupholster -- Installment 3

Last time we removed all of the old fabric off of our couch. Now it was time to get to work on the upholstering. We took notes as we were taking all of the old fabric off of the couch. I recommend that you do this as well. One thing we wrote down was the order that we removed the pieces of fabric. The reason for this is that you will want to reupholster in the reverse order. That meant the very first thing to do was to put on the seat deck and the front frame cover. For our fabric we actually ended up using a paint drop cloth which is just natural cotton canvas. This is a durable, inexpensive and easy to clean option. 

Some people upholster by keeping the old pieces of fabric to use as patterns. Mom wasn't taught that way in her class. This is why you won't see us using patterns on the sofa (we did keep them for the cushions but didn't end up using them). 

First thing we did was measure the width and length of the front of the frame cover. You will want to add two inches to all sides. The purpose of this is to make sure you have enough fabric. I suppose you don't have to do this if you trust your measurements but I say better safe than sorry! When you have your measurements  go ahead and cut your material.

Next measure from the front of the frame to the back of the couch, called the back rail. You can't actually see this piece when the couch is covered with fabric. Measure the length. Again, be sure to add two inches to all sides. 

It is probably a good idea to be writing these measurements down as you go. Cut out this piece. When you have your two pieces cut, sew them together leaving an inch seam allowance. 

When you have the two pieces sewn together find the center of the fabric and the center of the couch. Pin in place. Then pin the rest of the way down the couch.

Once you have your fabric pinned down you'll want to take a large curved needle that's been threaded with button twine and run it through your 1 inch seam allowance, through the bottom of the couch, around the spring, and back up. Repeat down the whole length of the couch catching every spring.

Once you are finished sewing the decking to the springs you are ready to start stapling. First you'll want to pull the front frame cover down and staple it to the bottom of the front rail, starting in the middle.

Be sure to cut around the middle couch leg.

Start at the center and staple about half way down both sides then it's time to move to the back. Staple the same sections that you stapled in the front. Once complete move back to the front of the couch. Keep working in small sections like this, moving front to back, until you have almost the entire front and back stapled. In the back the goal is to staple the fabric to the top of the back rail. You can't see much detail from the picture, but that is what we are doing here.

If you'll remember we stopped stapling the front and the back before we got all the way to the edge. The reason for this is you'll have to make cuts in the corners to get the fabric around the frame to staple to the sides of the sofa. To do this we used a large needle and stuck it through where we would be making our cuts. You'll need to make a straight cut towards the needle. The second cut go back about an inch from the needle and then make a small cut at a 45 degree angle to the same depth as the first cut. We added a small black line to the second photo to show you where to place the cut. The purpose of the second cut is to go around the arm post. 

Pay extra attention to make sure your fabric doesn't pucker. Once you are satisfied you can start stapling the fabric to the sides. Again, start in the center and work out in small sections, alternating side to side from the center (staying on the same side of the sofa until the side is complete). After you have stapled the fabric to the front rail, the back rail and the sides you'll want to cut off the excess (remember you measured two inches extra for good measure). 

You'll notice that our fabric is the same for the deck piece and the front frame cover. It isn't uncommon to have the decking be a less expensive solid piece of fabric from the rest of the sofa. Since we were using canvas we decided to just go ahead and make them the same.

Now it's time to sit back and relax on your new sofa decking!!

Join us next time as we upholster the sofa arms in installment 4.

A Place to Settee!!

My cousin has been learning to upholster at the same time I have. She brought over her own project and we would work on my project for a while and then work on her project. Unlike me, she is smart and chose something that wasn't a sofa for her first project. Her project was a settee that her dad gave to her. I can remember sitting on this when we were small children. Here are some before pictures.

As you can see it's a beautiful piece of furniture. However, with the burnt orange velvet upholstery it was stuck in the 70's. The first thing we did of course was take off the old upholstery. Then since it was a little wobbly we went about trying to strengthen the frame. We put some glue on the joints and then strapped a belt around it to keep it in place while the glue dried. We made sure to put something on the top side of the belt so that the furniture wouldn't be scratched.

I find the insides of furniture fascinating (that's the sofa in the background).

After we took off the bottom and removed the old upholstery we took the bottom board and traced around a new piece of foam (the old was too degraded to be re-used). To cut the foam it is best to use an electric knife. No joke, an electric knife! This is a trick my mom learned in her upholstery classes.

We took our piece of foam and sprayed it with a spray adhesive. Next we covered it with a piece of bonded polyester cushion wrap. If you are using this spray adhesive be sure to work fast. Also, it is a little hard to remove from your hands with plain soap and water, but it will come off easily with nail polish remover.

Next we covered the foam and poly with the cushion cover we had made from our chosen fabric.

To cover the inside back we first put back on the old cotton batting and measured for our fabric.

We found the point we had designated as the center of our fabric and pinned it in place.

Next we spread out our fabric and started stapling around the edges.

Once we had stapled around the fabric we cut off the excess.

This piece has double cording so we hot glued it on.

And here is the final product. Much, MUCH improved!!

Front Door Makeover

I took a break from all of the upholstering to paint my front door last weekend. I wanted to go ahead and get it done before it got too hot and humid.

Here are two before shots. You can see it's just a solid oak door with two side lights.

I gave it a light sanding and then primed it with a white enamel primer (make sure you get outdoor paint!).

The color that I chose is Sherwin Williams "Spicy Hue". It's a rusty orange. The salesman at Sherwin Williams tried to talk me out of it. He said "I can't tell you when's the last time I sold this color. I think it's a little bright for a front door." I kindly told him that he was about to sell some now and to give me a quart. :)

And here is the final result. I think it's beautiful and it really makes the front door stand out! I might even take a picture of it with me the next time I go to Sherwin Williams and show the salesman how great it looks!

60s Mod Couch Reupholster -- Installment 2

Last time we had just acquired the 60s mod couch to reupholster. This week we took the old fabric off the couch. First we took off the skirt. Then we took off the dust cover on the bottom.

Next we took off the couch back.

Then we took off the outside of the couch arms. Next we took off the inside back. Then the inside of the arms. Then the couch bottom.

Look at all that dirt under those cushions! There was actually a straw pad under that cotton batting.

Join us next time as we put on our first piece of new fabric!

60s Mod Couch Reupholster -- Installment 1

It has been a very polleny spring here. I'm not even sure if that is a word but I don't know how else to describe  it. For example, an extreme pollen count is any over 1500. Our pollen count was over 8,000 one day! Cars driving through the parking lot were kicking up pollen like it was dust. For that reason I have been unable to do any painting. Can you imagine all the little pollen grains sticking to wet paint? Ay yi yiiiiii. BUT my mom has been promising to teach me how to upholster so we thought now was the perfect time!

I feel in love with this awesome mod looking couch I found at Goodwill. I consulted with the expert (my mother) and we decided that would be a good starting piece since it was mostly straight cuts. This couch is huge. It is well over 7 feet long. Here are some before pictures.

I decided to do this as a series since we are having "class" one night a week. Join us next week as we take off the old upholstery!